Christie roadie 25k User Manual page 122

OPERATION
The Status LED Codes
If the status code display on the back of the projector shows one of the following
values, you have encountered a likely system error requiring the attention of a
qualified service technician (see System Warnings and System Errors, above).
Acknowledge and clear the error with Exit Exit from presentation level, or try
resetting the projector by powering it off and on again, cooling when necessary.
Consult Table 3.6 and contact your dealer if the problem persists.
The specific code number identifies the source of the error detected, and is
particularly useful in cases where the projector is too far away to read the
accompanying text message in the LCD status display window. For example, the
code "27" means the lamp could not be turned on. Error codes for this projector are
listed in Table 3.6.
3-68
Roadie 25K User's Manual