Christie roadie 25k User Manual page 67

Arrow Keys
Use the
within a pull-down list without having to first scroll through options. See also Editing
Text later in Section 3.
Use the
standard remote keypad, use the
state for power, shutter and OSD keys. See details provided on the back of the remote
keypad.
PIP (Picture-in-Picture)
PIP
NOTE: 1) Not available in v1.0 software. 2) Can be used with two digital sources, or
with one digital and one analog source. PIP of two analog sources is not possible. 3)
PIP performance may be limited by high frame rates.
Press the
two images can be displayed at once. As desired, these images can be different from
one another, or they can be duplicates. With at least one source connected, press
followed by the source desired for the secondary image (inputs 1-6). For example,
press
PIP
INPUT 1
source. To display the secondary image from a different source, select one of
the other input keys.
With Picture-in-Picture running, source image adjustments such as location and
resizing affect the secondary image only. Swap the images (
current primary image. To remove the secondary image from the display, press
Swap
Swap
Press
Swap
image becomes secondary, and the secondary image becomes primary.
NOTES: 1) This key is available on the "brick" Rental/Staging remote only.
Alternatively, a swap can be accessed in the menu system. 2) Requires PIP; not
available in v1.0 software.
Lens Focus, Zoom and Shift
Focus Zoom Shift
Motorized lens controls are not available in this projector.
Backlighting
Press the "lightbulb" key to illuminate the keys on the remote without sending a
command to the projector.
Remote keypad operating settings (protocols)
The standard IR remote keypad stores an operating setting called protocol in
memory. In some applications, such as when you want to use multiple IR remotes to
control different projectors independently, you may want to override the default
keypad protocol set at manufacture (which is "A") for one of the remotes. See 2.14
Remote Keypad Protocols and Conversion for complete instructions.
NOTE: In v1.0 software, only the IR protocol "A" is supported.
keys to change a slidebar value or to select a different option
keys to navigate within a menu, pull-down list or text box. On the
toggle to enable or disable the Picture-in-Picture function in which
PIP
to add an image from a DVI source to your original display of an
Input 2
to swap the current picture-in-picture relationship so that the primary
ON and OFF keys to force the corresponding
Roadie 25K User's Manual
OPERATION
PIP
) to access the
Swap
.
PIP
3-13