Christie roadie 25k User Manual page 97

defaults, the factory settings can be recovered with selection of "Reset to Factory
Defaults?" in the Color Primary Settings submenu accessed via the Service menu
(password-protected).
From the factory, the projector can utilize
any of the 3 pre-defined color
performance settings identified at right
(default=Max Drives), or colors can be
driven on the basis of color temperature.
For most applications, one of these
options will produce accurate and realistic
colors from a variety of sources. They can
be applied at any time in the Advanced
Image Settings menu ("Select Color
Adjustment"), and are not adjustable.
DEFINING "USER" COLOR GAMUTS:
defined "Select Color Adjustment" options exactly suit your needs. For example, you
may require a unique color gamut (range) for a single projector or application, or you
may need to precisely match colors across multiple adjacent displays. In such cases,
use the Color Adjustments by X,Y or Color Saturation submenus to define the precise
hue of each primary color component (red, green, blue, white, magenta, cyan,
yellow) used to generate the millions of colors produced in displays. You can create
up to four custom color gamuts (User 1, 2, 3, or 4) with these adjustments.
Note that the two menus differ only in their user interface, so use whichever menu
best suits your needs and application.
•
Color Adjustments by X,Y — Enter known x/y coordinates from the
chromaticity graph.
•
Color Saturation — Adjust color slidebars and judge image color by eye or
meter.
A user-defined color "adjustment" can be applied for a source by selecting the
desired "User" option in the "Select Color Adjustment" list accessed in the Advanced
Image Settings menu.
Figure 3.19. Color Performance
In some cases, you may find that none of the pre-
Roadie 25K User's Manual
OPERATION
Choices
3-43