Christie roadie 25k User Manual page 20

INSTALLATION AND SETUP
Tilting and Special
Orientations
2-14
Roadie 25K User's Manual
Adjusting the Feet
For installations on a floor or suitable
supporting structure, a single
projection head should rest firmly on
its feet. There is no need for the

FredFrame unless stacking with
another Roadie 25K, or unless you
decide to rig and fly the projector.
To adjust the height and level of the
projector, extend or retract the feet by
rotating them.
See Figure 2.16.
Tilting
'
For any installation, you can tilt the
front end of the projector up or
down as much as 15° (see right).
Likewise, side-to-side tilt must not
exceed 15° (see Figure 2.17
below). This limit ensures safe
lamp operation and proper position
of the liquid cooling reservoir in the projector.
Special Orientations
Since this projector cannot be inverted or tilted beyond 15°, all installations are front-
mount and require the "Front" Image Orientation setting in the Configuration menu.
WARNING
Do not invert this projector.
Figure 2.16. Adjusting the Feet
WARNING
Tilt only as shown.
Figure 2.17. Side-to-Side Tilt