Table of Contents
Advertisement
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See 2.10. Keypad Protocols and
Conversion, and 3.7, Configuring System Parameters.
Pixel
Pixel
Pixel
Press
to access the pixel tracking and pixel phase double slidebar. Adjust pixel
tracking first: use
sampling clock to correct consistency and/or aspect ration of the image. For proper
phase, use
ON
disappears and the image is stable throughout. See 3.6, Adjusting the Image (Size and
Position subsection) for a complete explanation of tracking and phase.
Position
Position
Press
Position
to move the image using the double slidebar. At the slidebar, use
and
to move the image left or right, use
down.
Lens
Lens
Remote lens features are not available in this projector. Adjust the lens manually for
proper focus and (if applicable) zoom. Offsets can also be mechanically adjusted. See
Section 2.
Shutter
Shutter*
(OPTIONAL)
If your projector has a mechanical lens shutter (a.k.a. douser) installed, press and
Shutter*
hold
for approximately 1 second to toggle the shutter closed or open with a
single key press (this also blanks the image electronically). Or quickly press and
release
Shutter*
and follow immediately with
correct toggle (useful if you are unsure of the present status). Close the shutter
whenever you want to mute all display yet maintain access to projector functions.
Open the shutter to regain the display. With no shutter installed,
image electronically, but the blanking is not quite as black.
NOTES: 1) Upon power-up, the shutter is open. 2) The lamp remains on regardless
of shutter status.
Mute
Mute*
Use
Mute*
to mute (hide) the current menu—press and hold for approximately 1
second to toggle the menu on or off with a single key press. Or quickly press and
release
Mute*
and follow immediately with
correct toggle (useful if you are unsure of the present status).
Function Key
Func
From presentation level, press
color or colors in the display. For example,
Func
data,
shown below and also appears on the back of the IR remote keypad. Color enabling
can also be accessed through the menu system rather than these shortcuts.
and
to increase or decrease the frequency of the pixel
and
OFF
to increase or decrease pixel phase so that any shimmer
Func
followed by a 2-digit number to enable a specific
will display all colors data. The list of available color combinations is
ON
and
OFF
to move the image up or
ON
or
OFF
if you want to guarantee the
Shutter*
ON
or
OFF
if you want to guarantee the
Func
will display only red and green
DLV1280 DX User's Manual
OPERATION
still blanks the
3-9
Advertisement
Table of Contents
