Christie roadie 25k User Manual page 33

Extra Video
'
Optional Inputs
'
SMPTE 372M video standards. For full details, consult the Dual SD/HD-SDI manual
(available separately).
Not possible. Composite and S-Video connect to
Optional input modules allow you to increase your total number of inputs and/or
accommodate different signal types, whether analog or digital. Install in the areas
INPUT 6
labeled or (if available)
•
RGB 500 Input Module
•
RGB 400 Active Loop Thru Input Module
•
RGB 400 Buffered Amplifier Input Module
•
Composite/S-Video Input Module
•
PC250 Analog Input Module
•
Serial Digital Input Module
•
Digital HDTV Module
•
DVI Input Module
•
Dual SD/HD-SDI Module
For even more sources, connect a 3
RS422-compatible, to any of the three RS422 ports.
NOTES:. 1) Connect analog HDTV signals directly to
"RBG" input module installed—the optional HDTV Input Module used in earlier
projectors is not needed or recommended. 2) See Appendix F, Optional Input
Modules for a brief description of each interface.
INSTALLATION AND SETUP
INPUT 3
INPUT 5.
These interfaces include:
(note: not currently supported)
(note: discontinued)
(supplied as standard; available 2005)
rd
-party switcher to the RS232 IN port, or, if
INPUT 1
Roadie 25K User's Manual
INPUT 4
and only.
or to any other
2-27