Christie roadie 25k User Manual page 77

CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3
From the presentation level press
Channel Setup menu, press
and press Enter . The Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and press
Enter . The Channel Edit menu will appear similar to the sample shown in Figure 3.14.
Figure 3.14. Channel Edit Menu (
If desired, review and/or edit the following channel setups in the Channel Edit menu:
•
CHANNEL NAME:
here. Channel names can be up to 12 characters in length.
•
CHANNEL NUMBER:
NOTES: 1) If you enter a channel number that already exists, a dialog
message appears indicating that this number is already in use–assign a
different channel number. 2) You can define up to 50 channels.
•
INPUT:
1-8, corresponding to where on the projector's input panel the
source is connected.
•
IN MENU:
If checked (default, except for automatically defined channels
with unchanged parameters), this defined channel will then appear in the
list available when
accessed via
On-screen display of the channel list is an option that must be set in the
Menu Preferences menu.
•
AUTO SOURCE:
locate this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only when it is
directly selected via
not result in a channel change.
•
LOCKED:
If checked, all of the image settings for this channel are disabled.
If unchecked (default), all available image settings can be adjusted as
desired. You cannot use Auto Setup with a locked channel.
•
PREVIOUS CHANNEL:
settings for the previous channel in the Channel Setup list.
•
NEXT CHANNEL:
for the next channel in the Channel Setup list.
Menu
to display the main menu. To display the
, or move the highlight to the Channel Setup option
An alpha-numeric label can be defined and/or changed
A 2-digit channel number can be changed here.
Chan key is pressed. If unchecked, the channel must be
Chan on the keypad or via the Auto Source function. NOTE:
If checked, (default), the projector can automatically
Chan on the keypad—and a change in input signal will
Select this option to see or change Channel Edit
Select this option to see or change Channel Edit settings
OPERATION
)
SAMPLE
Roadie 25K User's Manual
3-23