OPTIONAL INPUT MODULES
RGB400 Active Loop-Thru
Input Module
38-804607-xx
Composite / S-Video
Input Module
38-804608-xx
PC250 Analog
Input Module
38-804609-xx
F-2
Roadie 25K User's Manual
'
This module receives analog RGB input signals from computers or other RGB source
devices. Video inputs are 75
through to another display device.
RGB400ALT Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
BNC connectors for RGB signal inputs
◊
buffered loop-through video outputs
'
This module receives composite video input signals from tape or disk players. Video
S
inputs are 75
terminated. Outputs provide buffered loop-through to another display
device, if desired.
NOTES: : 1) This interface is not a decoder. 2) Not supported in v1.0 software.
Composite/S-video Features
◊
BNC connectors for composite RGB signals
◊
4-pin mini-DIN connectors for S-Video signals
◊
buffered loop-through video outputs
'
This module receives analog RGB input signals from IBM PC compatibles or
Macintosh computers. Video inputs are 75
buffered loop-through to another display device.
S
terminated. Video outputs provide buffered loop-
S
terminated. Outputs are provided for