Camshaft - Husqvarna TE 250 Workshop Manual

Camshaft

Check that cam surfaces are scored, stepped, grooved etc. Insert the camshaft
between two references and then check deviation using two comparators.
Wear limit: 0.0039 in.
Check that the cams are in good conditions, without wear or deformation.
Cam height "H"
INTAKE (new) = 36,57 mm/ 1.44 in.
EXHAUST (new) = 35,94 mm/ 1.41 in.
A)
B)
Part. N. 8000 B0148 (02-2008)
ENGINE OVERHAULING
A
INTAKE
:
B
EXHAUST
:
INTAKE
EXHAUST
G.9