Husqvarna TE 250 Workshop Manual page 402

CONNECTING THE HEADLIGHT
CONNECTING THE LIGHT SWITCH
POSITIONING THE LIGHT SWITCH
ANCHORING THE RIGHT RADIATOR
"KIT" ASSEMBLING INSTRUCTIONS
Connect the headlight connector.
Connect the 800093221 light switch to both racing cable pins.
Drill a hole in the area signalled on the headlight holding cowl and insert the
800093221 light switch, then screw in the 800071755 protection cap.
Anchor the right radiator by means of the three screws removed previously. Install
the radiator protection grid.
O.60 Part. N. 8000 B0148 (02-2008)