Husqvarna TE 250 Workshop Manual page 325

ELECTRIC SYSTEM, DIGITAL INSTRUMENT
• Voltage regulator positioning.
Voltage regulator in place. It is recommended to fasten it only after connecting the
system earth cable screwed with the A.T. coil screw (see the instructions below).
8000B0563 voltage regulator with 8000B1061 heat dissipation plate and
8000B1071 thermal compound.
Apply the thermal compound between the regulator and the plate and between
the plate and the frame beam. Overall 10 g of compound.
• Connecting the remote control switch cable to the starting motor.
Connect the remote control switch 8000B0827 cable to the starting motor.
- 8000B0827: L=600 mm
• Connecting the battery negative cable and the motor-frame earth cable.
Bolt the 8000B0254 battery negative cable and the 8000B0253 motor-frame
earth cable as shown.
- 8000B0254: L=890 mm
- 8000B0253: L=460 mm
Part. N. 8000 B0148 (02-2008) M.45