Husqvarna TE 250 Workshop Manual page 172

Auxiliary shaft
Mount the plug and the bush. Mount 2nd gear, the washer and the circlip. Mount the 6th gear and the circlip. Mount the washer.
Fit the washer into the 3rd gear. Mount the 3rd gear, the washer and the circlip. Apply "MOLYKOTE G-n plus" under 3rd gear.
Mount the washer. Fit the bush into the 4th speed gear. Mount the 4th speed gear, the washer and the circlip. Apply "MOLYKOTE G-n plus"
under 4th gear. Mount 5th gear and the washer. Mount the needle bearing, the 1st speed gear and the washer.
A: 1sh gear engaged
B: 4th gear engaged
C: 3rd gear engaged
D: 6th gear engaged
E: 1st gear aligned with shaft broaching
F: lubricate at the assembly with MOLYKOTE G-n plus
Main shaft
ENGINE REASSEMBLY
5 Speed transmission (TC)
H.18
Auxiliary shaft complete
Part. N. 8000 B0148 (02-2008)