Fitting The Fork Back On Themotorcycle - Husqvarna TE 250 Workshop Manual

Hide thumbs Also See for TE 250:

Table of Contents

FRONT SUSPENSION

FITTING THE FORK BACK ON THEMOTORCYCLE

Fit the fork back onto the frame following the instructions in the motorcycle

manufacturer's manual, as for the steering elements, brakes and wheel. The

incorrect assembly of these elements can be dangerous for the rider.

For the fork to work correctly, the wheel must be installed on the fork as follows:

• Insert the axle through the right wheel axle clamp, the wheel and the left wheel axle

• Screw down the nut on the left side of the axle and tighten fully.

• Fully compress the fork a few times.

• Tighten the two bolts on the right wheel axle clamp following the sequence 1- 2- 1.

Part. N. 8000 B0148 (02-2008)

Show Quick Links

Table of Contents