Husqvarna TE 250 Workshop Manual page 270

Braking system .........................................................
Brake disc .................................................................
Wear check and brake pads replacement .................
Front braking system bleeding (TE-TC-TXC) ............
Front braking system bleeding (SMR) .......................
Rear braking system bleeding ...................................
Fluid replacement .....................................................
BRAKING SYSTEM
The braking systems is divided into two completely independent circuits.Each system is provided with a caliper connected to a hydraulic
control pump with tank for the fluid.
BRAKES
L.2
L.4
L.5
L.6
L.7
L.8
L.9
1. Front brake control lever
2. Front brake pump with oil reservoir (TE, TC)
2. Front brake pump (SMR)
2A. Oil reservoir (SMR)
3. Front brake hose
4. Front brake caliper
5. Front brake disc
6. Rear brake oil tank
7. Rear brake hose
8. Rear brake caliper
9. Rear brake disc
10. Rear brake pump
11. Rear brake control pedal
L.2
TE-TC-TXC-SMR
Part. N. 8000 B0148 (02-2008)