Husqvarna TE 250 Workshop Manual page 192

TE-TC-TXC-SMR
TE-TC-TXC-SMR
TE-TC-TXC-SMR
ENGINE REASSEMBLY
Assembly of cam-chain tensioner (TE-TC-TXC-SMR)
Back the pin for tightening the chain, reassemble the cam-chain tensioner with its
two screws (8 Nm-0,8 Kgm-5.8 ft/lb). Insert the spring, the washer and the rear bolt
(5 Nm-0,5 Kgm-3.6 ft/lb).
Assembly of cam-chain tensioner (SMR 450-R)
Retreat the chain adjuster pin, reassemble the chain adjuster with the support by
means of two fastening screws (8 Nm-0.8 Kgm-5.8 ft/lb). Insert then the spring,
the washer and the rear screw (10 Nm-1 Kgm-7.3 ft/lb).
Mount the intake camshaft aligning the reference on the gear with the left reference
on the timing gear.
Mount the exhaust camshaft aligning the reference on the gear with the right
reference on the timing gear.
H.38 Part. N. 8000 B0148 (02-2008)