Flywheel Disassembly - Husqvarna TE 250 Workshop Manual

ENGINE DISASSEMBLY

Flywheel disassembly

Maintain the rotor immobilized and remove the rotor nut (17 mm wrench).
Remove the rotor using the puller (code no. 8000 A1559 for TC-TXC and 8000
B0144 for TE-SMR).
Remove the timing system chain.
If the chain slider is worn, remove the fastening screw then the chain slider in
order to replace it.
Remove the valve timing pinion using a puller.
Part. N. 8000 B0148 (02-2008) F.11