"KIT" ASSEMBLING INSTRUCTIONS
Assemble the voltage regulator (8) in the front side of the steering tube with the
10
8
screws (10) M6x20. Assemble the ENGINE START (29) and ENGINE STOP (28)
commutators on the handlebar and the clutch microswitch (24) on the clutch
control. Connect the KIT components to the main wiring harness (see the wiring
diagram- page O.41).
After completing the assembly operations, assemble back the previously removed
components.
29
28
O.28
Part. N. 8000 B0148 (02-2008)