Husqvarna TE 250 Workshop Manual page 400

CONNECTING THE HIGH VOLTAGE COIL
ANCHORING THE VOLTAGE REGULATOR
CONNECTING THE RIGHT ELECTRIC SWITCH
CONNECTING THE FRONT STOPLIGHT SWITCH
"KIT" ASSEMBLING INSTRUCTIONS
Connect both pins to the coil.
BOTH PINS ARE DIFFERENT IN WIDTH AND CANNOT BE INVERTED. MAKE
SURE THAT BOTH PINS MAY BE SECURELY INSERTED INTO THE COIL.
Screw the voltage regulator into the frame. Make sure that the contact plate
between the regulator and the frame is present and covered with thermoconductive
paste.
Connect the connector of the right electric switch.
Connect the connector of the front stoplight switch.
O.58 Part. N. 8000 B0148 (02-2008)