Husqvarna TE 250 Workshop Manual page 326

Earth cable wire
harness 8000 B0252
Motor-frame
earth cable
8000 B0253
Screw the
regulator to
the frame
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
Bolt the 8000B0254 battery negative cable and the 8000B0253 motor-frame
earth cable as shown.
• Connection of the frame earth cable and of the motor-frame earth cable.
Bolt the motor-frame earth cable and the electric system earth cable to the left coil
screw. Bolt the earth cable of the regulator connector to the right coil screw.
- 8000B0253: L=460 mm
Earth cable of
the regulator
• Connecting the voltage regulator.
Connect
Connect the regulator connector to the regulator and screw the regulator onto
the regulator
the frame.
• Connecting relay cables.
Connect the 'DC' cable to the relay on the right side of the motorbike.
DC cable
M.46 Part. N. 8000 B0148 (02-2008)