Husqvarna TE 250 Workshop Manual page 452

FRAME AND WHEELS
Removing the front wheel (pages Y.6-Y.7)
Set a stand or a block under the engine and see that the front wheel is lifted
from the ground.
SMR: remove the two screws (A) and the brake caliper.
Loosen the screws (1) fastening the wheel axle (2) to the fork rod supports.
TE-TC-TXC
TE-TC-TXC
Lock the wheel pin head and at the same time loosen the screw (3) on the
opposite side; remove the wheel axle.
Y.6 Part. N. 8000 B0148 (02-2008)