Checking Feature Selections Before Copying (Check Mode) - Konica Minolta bizhub pro 1050 User Manual

Checking Feature Selections Before Copying (Check Mode)

Display the Check Screen to check the feature selections you made, and use Proof
Copy to make a sample copy if needed, before making multiple copies. This is a
convenient and cost effective way of viewing the results of the copying selections.
Specifications for Check Mode
❒ Proof copy is available when using ADF, or when using Memory Scan mode for
multiple originals or originals to be scanned from original glass.
1.
Select the desired copy conditions on the Copy Screen.
2.
Press [Mode Check] on the control panel to display the Check
Screen.
Check the job settings on the screen.
If Next is active on the screen, touch it to proceed to the next page.
If making any setting change from the Check Screen, proceed to the next
step.
If releasing any application function from the Check Screen, proceed to
step 4.
If a sample copy is needed, proceed to step 5.
If settings are OK, proceed to step 7.
3.
Change the settings from the Check Screen.
13-4