Konica Minolta bizhub pro 1050 User Manual page 267

Copying Image in the Center of Copy Paper (Image Centering) (continued)
• APS and AMS are automatically released, and 1.000 (100%) is selected as
a magnification ratio.
• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Memory
Scan mode will function automatically.
5.
Enter the desired print quantity from the control panel keypad.
6.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the original glass.
DO NOT close the ADF when No Image Area Erase is selected.
Placing original obliquely on the original glass may cause black copy marks.
7.
Press [Start].
Having Any Problem?
The Image Centering function may not operate properly if the lighting in the
work place is directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.
11-47