How to Make a Basic Copy
Follow the procedure below to make a basic copy.
Use Function key to recall the job setting previously registered using Mode Memory.
Up to five settings can be recalled.
The following procedure is basic and not always applicable to the operation of
selected copy conditions. When using a specific function, be sure to follow the
procedure described in each section.
1.
Display Copy Screen.
Touch COPY tab on the Machine Status Screen to display the Copy
Screen.
2.
Set copy conditions as desired.
The following settings are available on the Copy Screen.
Function Key (See p. 9-6)
Original Setting (See p. 9-8)
Special Image (See p. 9-19)
Zoom (See p. 9-24)
Application (See p. 11-6)
Output Application (See p. 12-6)
Copy Mode (See p. 9-27)
Paper Presetting (See p. 9-40)
3.
Enter the desired print quantity from the control panel keypad.
Entered quantity will be displayed on the touch panel.
For details of entering print quantity, see p. 8-15.
8-8