Konica Minolta bizhub pro 1050 User Manual page 364

Checking Feature Selections Before Copying (Check Mode) (continued)
5.
Make a sample copy.
Position originals in the ADF. Or, use Memory Scan mode to scan all
originals.
Press [Proof Copy] on the control panel or touch Proof Copy on the Check
Screen.
A sample copy will be output.
Press [Stop] to suspend the proof copying. In this case, the scanned image
data will not be deleted from memory.
You cannot change or release selections that appeared dimmed after proof
copying.
If the desired selection cannot be changed, press [Stop] to delete all the data
in memory, then press [Reset] to restart the job setting.
If any setting change is required, return to step 3, then repeat proof
copying, as required.
If the copy result is satisfactory, touch Close on the Check Screen to return
to the Copy Screen, then proceed to the next step.
6.
Change the print quantity, as required.
7.
Position originals, then press [Start].
If proof copying has been made, the machine will simply start printing
without scanning originals.
13-6