Konica Minolta bizhub pro 1050 User Manual page 368

Storing and Recalling Job Conditions (Mode Memory) (continued)
4.
Review the settings, then touch OK.
The Mode Memory Screen will be restored.
If any correction is required, touch Cancel to return to the Copy Screen. Make
new selections, then restart the operation from step 2.
5.
Touch the desired job key, then touch OK.
The job keys numbered from 01 to 18 are displayed on the screen.
Touching Next will display the keys from 19 to 30.
A blank keys without a lock icon (
that key, and a named job without a lock icon (
overwritten.
The key with a lock icon (
Touch OK to proceed to the Name Input Screen.
13-10
) indicate that no job is stored under
) displayed is locked and cannot be selected.
) displayed can be