Konica Minolta bizhub pro 1050 User Manual page 134

Folding Unit FD-501
Functions:
Number of punch holes:
Hole diameter:
Hole pitch:
Types of paper:
Output trays:
Cover paper type:
Paper sizes:
Stack capacity using PI:
Dimensions:
Power source:
These specifications are subject to change without notice.
7-6
Punch, Folding, Post inserting (PI), Straight delivery,
Output to secondary tray
2 or 3
6.5 mm
70 mm
±
13 to 116 lb (209 g/m
13 to 45 lb (130 g/m
Letter Fold-out, Z-Fold)
13 to 25 lb (91 g/m
13 ~ 166 lb (300 g/m
(sub) tray, or conforms to the specifications of selected
output device (Straight delivery)
Output trays available for the sheets finished through
Folding unit:
Primary (main) tray / Secondary (sub) tray of Finisher
FS-503: see p. 7-5.
Secondary (sub) tray on the left side of Folding unit FD-
501: 200 sheets max.
Straight delivery or Punch
• Any tray mentioned above is available for Straight
delivery or Punch.
• Any tray mentioned above is available for Folding or
Z-Fold.
• Secondary (sub) tray on the left side of FD-501 is
available only for Letter Fold-in, Letter Fold-out,
Double Parallel, or Gate.
PPC, HQ, coated, tracing (13 to 166 lb paper)
3-hole punch 12"×18", 11"×17", 8.5"×11", A3, B4, A4,
B5, 8K, 16K
2-hole punch 12"×18", 11"×17", 8.5"×14", 8.5"×11",
8.5"×11"R, 5.5"×8.5", A3, B4, A4, A4R, B5, B5R, A5,
A5R, F4, 8K, 16K
Folding 12"×18", 11"×17", 8.5"×14", 8.5"×11"R, A3, B4,
A4R, 8K
Post inserting 12"×18", 11"×17", 8.5"×14", 8.5"×11",
8.5"×11"R, 5.5"×8.5", 5.5"×8.5"R, A3, B4, A4, A4R, B5,
B5R, A5, A5R, F4, 8K, 16K, 16KR, tabbed standard
sizes, wide sizes (max. 12.76" × 18.11")
Straight delivery: conforms to the specifications of
selected output device
500 sheets max. (20 lb paper) for each tray
15.7 (W) × 25.8 (D) × 46.8 (H) inches
Weight: Approx. 264 lb
Internal battery
Option Specifications (continued)
0.5 mm (2 holes) / 8.0 mm
±
0.5 mm (2 holes) / 108 mm
2
) paper (Punch)
2
) paper (Folding, Letter Fold-in,
2
) paper (Double Parallel, Gate)
2
) paper when output to secondary
0.5 mm (3 holes)
±
0.5 mm (3 holes)
±