Using Finisher Fs-503 - Konica Minolta bizhub pro 1050 User Manual

Output to the Secondary (Sub) Tray
Collated : Collated mode outputs multiple copies of the original set. No offset
output is available.
Uncollated : Uncollated mode groups together multiple copies of each original.
No offset output is available.
Combined with the output modes above, you can also choose to output face up or
face down, and output front to back or back to front.
Face down
collated
This section describes the following output methods:
Non-sort / Collated / Uncollated output to the primary (main) tray
Stapled output to the primary (main) tray
Collated / Uncollated output to the secondary (sub) tray
Using Finisher FS-503 (continued)
Face down
uncollated
Example:
Make 3 copied sets
Face up Face up
collated uncollated
12-13