To Use Machine When Power Save LED Lights (continued)
Be sure to press [Power Save] for one second or longer, otherwise the
following message will be displayed and the Shut-Off (Low Power) mode will
not be activated.
Press POWER SAVER more than one second,
then release it for shut off mode
Press POWER SAVER continuously more
than one second for low power mode
2.
Power Save will be activated.
The [Power Save] LED will be lit and the LCD screen will be turned off.
When Weekly Timer Is Activated
The Weekly Timer function turns a copier on and off at the time specified by the
machine manager.
For details of the Weekly Timer function, see p. 5-6 of POD Administrator's
reference.
When a machine is in OFF condition under control of Weekly Timer, the [Power
Save] LED is lit and machine operation is unavailable.
However, the following procedure temporarily enables the machine operation. (Timer
Interrupt)
1.
Press [Power Save] on the control panel.
The Machine Status Screen will be displayed along with the message
shown below.
Timer interrupt mode
Please input password
The machine power will be turned off automatically after 5 minutes from this
state if a password is not entered.
2-23