To Use Machine When Power Save LED Lights (continued)
Auto Shut-Off
This function achieves further energy conservation by reducing power consumption
to 105W or less in standby mode.
In the initial setting, Auto Shut-Off follows Auto Low Power after a specified period
(initially 120 minutes) of copier inactivity, with the Power Save LED lit and all other
LEDs on the control panel and touch panel turned off. The Power LED keeps green.
To start a copying job, press [Power Save]. The copying operation will become
available.
The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes, or can be deactivated. For details, see p. 5-4 of the
POD Administrator's reference.
Using Power Save Manually
Follow the procedure below to operate Power Save function (Low Power or Shut-Off)
manually.
The machine is initially set to activate the Shut-Off function manually. To use
Low Power instead, see p. 5-4 of POD Administrator's reference.
1.
Press [Power Save] for one second or longer, then release it.
The following message will be displayed.
Using Auto Shut-Off:
Entry Shut off mode, after 10 second
Press key/screen to cancel
Using Auto Low Power:
Entry Low Power mode, after 10 second
Press key/screen to cancel
2-22