Checking Feature Selections Before Copying (Check Mode); To Use Check Mode - Konica Minolta bizhub pro 920 Copier Manual

14
14.2 Checking Feature Selections Before Copying (Check
Mode)
Display the Check Screen to check the feature selections you made, and use
Proof copy to make a sample copy if needed, before making multiple copies.
This is a convenient and cost effective way of viewing the results of the cop-
ying selections.
Reminder
Do not press [Stop] or [Reset] to change the setting, or all the settings will
restore the initial condition.

To use Check mode

0 Proof copy is available when using ADF, or when using Separate Scan
mode for multiple originals or originals to be scanned from original glass.
0 The following application functions can be released by touching [Clear]:
Program Job, Non-Image Area Erase, Neg. Pos. Reverse, Image Center-
ing, Full Scan, Overlay.
1
Select the desired copy conditions from the various setting screens.
2
Press [Mode Check] on the control panel.
The Check Screen will be displayed.
14-4
Advanced Information
bizhub PRO 920