Check Mode - Konica Minolta 3240 User Manual

Basic Operations

Check Mode

Use Check mode to confirm copying selections before pressing [START PRINT] key.
All settings made can be viewed in the Check mode screen.
1 Press [CHECK] to display the current settings.
2 Verify the settings made for the current job.
3 Press [OK] or [CHECK] to exit from the Check mode and return to the Basic screen.
If settings are OK, press [START PRINT] to start copying.
4 Otherwise, adjust settings, press [OK]; then press [START PRINT] when the Basic screen
is displayed.
NOTE: When [CHECK] is pressed in Interrupt mode, the original copy job settings will display, not the interrupt copy job
settings.
5-16 Basic Operations