Konica Minolta bizhub pro 1050 User Manual page 275

Reducing Images to Create Binding Margin (Reduce&Shift) (continued)
1.
Select the copy mode and paper size, as required.
2.
Touch Application on the Copy Screen.
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
3.
Touch Image Shift on the Application popup menu.
4.
Touch Reduce & Shift on the Image Shift Screen, then specify the
shift direction and amount.
Touch Front or Back. In Reduce & Shift mode, the Both Sides key
appears dimmed to show inactivity.
Touch to highlight the desired shift direction key, then use the touch panel
keypad or up/down arrow key to enter the desired shift amount, from 0 to
250 mm in 1 mm increments.
The image display on the screen allows you to view the shift direction and
amount to be printed on the printed sheets.
The AMS will automatically determine the magnification ratio according to the
shift amount specified for the front page. The shift amount and magnification
ratio determined for the front page will be automatically applied to the back
page. If any positioning adjustment is required, touch Back and make
direction and amount change.
11-55