Recalling Previous Job Settings - Konica Minolta bizhub pro 1050 User Manual

Recalling Previous Job Settings

Follow the procedure below to copy with a previous job settings.
Specifications for Recalling Previous Job Settings
❒ Only the last-completed output job settings can be recalled as the previous job
settings. Non-completed job or reserve job settings cannot be recalled, even if
the setting operations have been made last.
❒ The previous job settings can be recalled even after the machine power is
turned off then on.
1.
Press [Mode Memory] on the control panel.
The Mode Memory Screen will be displayed.
2.
Touch Pre-Job Recall.
The Job Check key will appear on the screen.
3.
Touch Job Check to review the settings.
The Job Recall Check Screen will be displayed.
Check the settings of the previous job on the screen.
Recalled settings can be altered from this screen. See p. 13-5 for details.
13-14