Checking Feature Selections Before Copying: Mode Check - Konica Minolta bizhub PRO C5501 User Manual

Advanced information
13 Advanced information
13.1

Checking feature selections before copying: Mode check

Display the Check Screen to check the feature selections you made, and use Proof Copy to make a sample
copy if needed, before making multiple copies. This is a convenient and cost effective way of viewing the
results of the copying selections.
0 Proof copy is available when using ADF, or when using Separate Scan mode for more than 100 sheets
of original or originals to be scanned from original glass.
1
Position the original, then select the desired copy conditions on the Copy Screen.
– Or, use Separate Scan mode to scan all originals.
2
Press [Mode Check] on the control panel.
The Check Screen will be displayed.
3
Check the job settings on the screen, using [Next] and [Previous] as required.
– To make any setting change from the Check Screen, proceed to the next step.
– To release any application function from the Check Screen, proceed to step 5.
– If a sample copy is needed, proceed to step 6.
– If settings are OK, proceed to step 7.
bizhub PRO C5501
13
13-3