Using Large Capacity Stacker Ls-501/Ls-502 - Konica Minolta bizhub pro 1050 User Manual

Using Large Capacity Stacker LS-501/LS-502

The Large Capacity Stacker LS-501/LS-502 Large Capacity Stacker has a stacker
(on the carriage) and a secondary (sub) tray, each of which has the following output
modes.
Output to the Stacker
Non-sort : Non-sort mode simply means that the offset-stacker finisher modes
are not selected. Copies will be stacked upon exit without being
offset by sorted sets.
Collated : Collated mode outputs multiple copies of the original set, having
each sorted set offset by 20mm upon exit.
Uncollated : Uncollated mode groups together multiple copies of each original
and offsets the sets upon exit.
Combined with the output modes above, you can also choose to output face up or
face down, and output front to back or back to front.
Output to the Secondary (Sub) Tray
Collated : Collated mode outputs multiple copies of the original set. No offset
output is available.
Uncollated : Uncollated mode groups together multiple copies of each original.
No offset output is available.
Combined with the output modes above, you can also choose to output face up or
face down, and output front to back or back to front.
Specifications for Using Large Capacity Stacker LS-501/LS-502
Stacker
❒ Paper size: 12"×18", 11"×17", 8.5"x14", 8.5"×11", 8.5"×11"R, A3, B4, F4, A4,
A4R, B5, A5, wide size paper (maximum 12.76" x 18.11")
❒ Paper weight: 13 - 64 lb Bond
❒ Number of sheets to be stacked:
❒ 5,000 sheets (12"×18", 11"×17", 8.5"×14", 8.5"×11", 8.5"×11"R, A3, B4, F4, A4,
A4R, wide size paper (maximum 12.76" × 18.11")
3,000 sheets (Coated paper, Min. 8.3"× 15.0"(210mm
12.8"×18.1"(324mm
2,000 sheets (B5, A5)
❒ Different sizes of paper cannot be loaded at the same time.
❒ To remove paper, open the front door and pull out the base car. If two units are
connected, paper can be removed from one unit while the other is operating.
❒ The stacker's specifications are described separately. See p. 3-2 to p. 3-7 for
details.
Secondary (sub) tray
❒ Paper size: 12"x18", 11"×17", 8.5"×14", 8.5"×11", 8.5"×11"R, 5.5"×8.5", A3, B4,
F4, A4, A4R, B5, B5R, A5, A5R, B6R, 8K, 16K, 16KR, standard tab paper,
wide size paper (maximum 12.76" × 18.11")
❒ Paper weight: 13 - 80 lb Bond
❒ Loading capacity: Maximum 200 sheets
❒ The secondary (sub) tray's specifications are described separately. See p. 3-2
to p. 3-7 for details.
12-20
×
460mm))
×
380mm) to Max.