To Stop Scanning/Printing - Konica Minolta bizhub pro 1050 User Manual

To Stop Scanning/Printing

To cancel the tandem copying job:
1.
Press [Stop] on the control panel of the master machine.
The scanning/printing job stops immediately, and the popup menu appears
on the Copy Screen of the master machine to ask you whether to continue
or terminate the job. At this time, the tandem mode is not released.
2.
Touch Continue to go on, or Exit to delete all the scanned data and
to release the tandem mode.
To cancel the job in the tandem machine only:
1.
Press [Stop] on the control panel of the tandem machine.
The tandem machine stops the current operation immediately, and the
popup menu appears on the Copy Screen of the tandem machine to ask
you whether to continue or cease the operation. At this time, the tandem
mode is not released.
2.
Touch Continue to go on, or Exit to delete all the data transmitted
to the tandem machine and to release the tandem mode.
The master machine will take over the remaining print quantity and
complete the job.
12-60
Using Two Copiers in Tandem (continued)