Konica Minolta bizhub pro 1050 User Manual page 323

2.
Touch Folding to select a folding type.
The Folding Mode Screen appears.
Touch any punch key to select it.
3.
Touch OK.
It will return to the Output Application Screen.
If you touch Cancel, it returns to the previous setting.
If you touch Function Off, folding output will be turned off but the selected
folding settings will be kept in memory.
4.
Touch OK on the Output Application Screen.
The icon of the specified output application appears on the Copy Screen.
Normally folded or Z-folded sheets will be delivered to Finisher FS-503's
primary (main) tray / secondary (sub) tray or to the secondary (sub) tray on the
left side of Folding unit FD-501. Using Letter fold-in, Letter fold-out, Double
parallel, or Gate, the folded sheets will be delivered only to the secondary
(sub) tray on the left side of Folding unit FD-501.
Be careful not to exceed the capacity of each tray when selecting the print
quantity, otherwise unexpected trouble may be caused.
Using Folding Unit FD-501 (continued)
12-27