Using Folder/Finisher Functions Manually (continued)
If multi-feeding is detected and the machine stops even if single sheet is
fed, press the Multi-Feed Detection button to turn on the lamp below.
To interrupt the operation, press the Start/Stop button again.
Using Fold&Staple mode, the finished sets will be delivered to the saddle
stitcher tray of Saddle stitcher SD-501. Be sure to withdraw the saddle stitcher
tray, and open the tray stand when fully withdrawn. See p. 12-9 for details.
To fold or fold&staple booklet-styled prints manually, arrange the printed
sheets as shown below before placing them into the post inserter.
ON
OFF
Lower tray
Multi-Feed Detection button
48 1
26 23
26 23
48 1
12-39