Adjusting Position of Copy Image (Image Shift)
Use Image Shift to adjust the position of copy images, e.g. for the purpose of
creating a new binding margin on originals to make it easier for filing purposes.
Page Space function is available only when Booklet or 2 Repeat mode of Repeat has
been already selected. Use this function to make the desired amount of blank space
between the two images on a page. See the illustration on p. 11-52 for details.
If image loss is likely, select the Reduce & Shift mode instead of regular Image shift.
See p. 11-54.
Specifications for Image Shift
❒ Shift amount: 0 to 250 mm in 1 mm increments
❒ Setting in 0.1mm increments using up/down arrow key is also available. This
setting change can be made on the Utility Menu Screen.
❒ Creep amount: 0 to 50 mm in 1 mm increments
❒ Page space amount: –250 to +250 mm in 1 mm increments
Original
1.
Select the copy mode and paper size from the Copy Screen, as
required.
2.
Touch Application on the Copy Screen.
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
Right
Left
Up
Up
Right
Down
Left
Copies
Down
11-49