Konica Minolta bizhub pro 1050 User Manual page 246

Inserting Images into Printed Sets (Image Insert) (continued)
7.
Scan the document feeder images:
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not
exceeding 100 sheets and load them from the block with the first page.
8.
Press [Start].
The originals positioned in the document feeder will be scanned into
memory.
9.
Scan the original glass images.
Open the document feeder.
Position an original FACE DOWN on the original glass, then close the
document feeder.
PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION.
10.
Press [Start].
11.
Repeat steps 9 and 10 for all originals.
• Memory overflow may occur during scanning.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
12.
Touch Memory Scan to exit the Memory Scan mode.
13.
Press [Start].
The copier will start printing when ready for output.
11-26