Troubleshooting - Konica Minolta bizhub pro 1050 User Manual

Using Two Copiers in Tandem (continued)

Troubleshooting

When a paper jam, SC-code (E-code, F-code) trouble or unloaded paper occurs
on either the master or tandem machine:
Remove the mishandled paper, take the appropriate troubleshooting measures to
correct the problem, or add paper.
When the trouble is cleared, the machine will restart printing for the remaining print
quantity.
When memory overflow occurs on either the master or tandem machine:
On the master machine
The scanning job will stop immediately, and the tandem copying job will be
suspended on both copiers. At this time, the tandem mode is not released.
Take the same measure to be applied for single copier referring to p. 5-12.
On the tandem machine
The tandem machine will start the tandem copying job when the memory becomes
available after completing some reserve jobs.
If the memory of the tandem machine cannot be available despite the elapse of time,
the tandem mode will be released on the tandem machine.
When the power is turned off on either the master or tandem machine:
The tandem mode will be released automatically in either case. Restart the
procedure from the first step.
12-61