Inserting A New Staple Cartridge Into Finisher Fs-503 - Konica Minolta bizhub pro 1050 User Manual

Inserting a New Staple Cartridge into Finisher FS-503 (continued)
3.
Remove the staple cartridge.
Pull down the handle of the staple cartridge to draw it downward.
4.
Set the staple roll into the staple cartridge.
Open the staple cartridge cover, then set the staple roll into the cartridge.
Close the cover, then remove the lock tape pulling it in horizontal direction.
Do not pull the lock tape upward, otherwise the tape may rip and remain inside
the cartridge so that the staples cannot be used.
4-12