Dial Lock Function - Icom IC-7610 Basic Manual

Setting the frequency (Continued)
Entering a Split Frequency Offset
1. On the F-INP screen, enter the Split Frequency
Offset.
LTo enter a minus shift direction, touch [•(−)].
L Enter an offset between −9.999 MHz and +9.999 MHz
(1 kHz steps).
Touch for -Split
Entry examples
• 10 kHz: [1], [0], [SPLIT]
• −1.025 MHz: [•(−)], [1], [0], [2], [5], [−SPLIT]
2. To save the entry, touch [SPLIT] or [−SPLIT].
• Closes the F-INP screen, and the Split function is
automatically turned ON.
The Split function is ON.

Dial Lock function

The Dial Lock function prevents frequency changes
caused by accidently rotating
LThis function electronically locks the dial.
Hold down for 1 second to turn the Dial
SPEECH
Lock function ON or OFF.
• " " is displayed while the function is ON.
• During Split Frequency operation, the Split Lock function
may be turned ON. (p. 4-10)
» SET > Function > Lock Function
MENU
[SPLIT] or [-SPLIT]
is displayed
Shifted by the offset amount.
.
MAIN DIAL
Entering a Memory channel
1. Push , and touch "VFO/MEMORY."
QUICK
2. Touch [MEMORY] to select the Memory mode.
3. Touch the MHz digits.
4. Touch [F-INP].
5. Enter a Memory channel number between 1 and
99. (Example: Memory channel 5)
L If you want to set a Program Channel number (P1 or
P2), enter "100" for P1, and "101" for P2.
6. Touch [MEMO] to save the entered channel.
• Closes the F-INP screen.
3-6
BASIC OPERATION
Memory mode
Hold down
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21