Logging On Through The Web Management Interface - HP 9304m Installation And Getting Started Manual

Installation
If you want to filter for a special character instead of using the special character as described in the table above,
enter "\" (backslash) in front of the character. For example, to filter on output containing an asterisk, enter the
asterisk portion of the regular expression as "\*".
HP9300# show ip route bgp | include \*

Logging On Through the Web Management Interface

To use the Web management interface, open a web browser and enter the IP address of the HP device in the
Location or Address field. The web browser contacts the HP device and displays a login dialog, as shown in
Figure 2.12.
NOTE: If you are unable to connect with the Routing Switch through a Web browser due to a proxy problem, it
may be necessary to set your Web browser to direct Internet access instead of using a proxy. For information on
how to change a proxy setting, refer to the online help provided with your Web browser.
Figure 2.12 Web management interface login dialog
By default, you can use the user name "get" and the default read-only password "public" for read-only access.
However, for read-write access, you must enter "set" for the user name, and enter a read-write community string
that you have configured on the device for the password. There is no default read-write community string. You
must add one. See the Security Guide .
As an alternative to using the SNMP community strings to log in, you can configure the device to secure Web
management access using local user accounts, a RADIUS authentication server, or a TACACS/TACACS+ server.
On the HP 9304M, HP 9308M, or HP 9315M, if you have configured a greeting banner (using the banner motd
CLI command), a panel with the greeting is displayed first. Click on the Login link to proceed to the Login dialog.
Here is an example of the greeting panel:
Using the Web Management Interface
When you log into a device, the System configuration panel is displayed. This panel allows you to enable or
disable major system features. You can return to this panel from any other panel by selecting the Home link.
The Site Map link gives you a view of all available options on a single screen.
2 - 29