HP 9304m Installation And Getting Started Manual page 157

Installation and Getting Started Guide
Table 5.5: CLI Display of Link Aggregation Information (Continued)
This Field...
Dis
Def
Exp
Clearing the Negotiated Link Aggregations
When a group of ports negotiates a trunk group configuration, the software stores the negotiated configuration in a
table. You can clear the negotiated link aggregation configurations from the software. When you clear the
information, the software does not remove link aggregation parameter settings you have configured. Only the
configuration information negotiated using LACP is removed.
NOTE: The software automatically updates the link aggregation configuration based on LACPDU messages.
However, clearing the link aggregation information can be useful if you are troubleshooting a configuration.
To clear the link aggregation information, use the following CLI method.
USING THE CLI
To clear the link aggregation information, enter the following command at the Privileged EXEC level of the CLI:
HP9300# clear link-aggregate
Syntax: clear link-aggregate
5 - 26
Displays...
Indicates the distribution state of the port, which determines whether
the port is ready to receive traffic over the trunk link.
• Dis – The port is ready to receive traffic over the trunk link.
• No – The port is not ready to receive traffic over the trunk link.
Indicates whether the port is using default link aggregation values.
The port uses default values if it has not received link aggregation
information through LACP from the port at the remote end of the link.
This field can have one of the following values:
• Def – The port has not received link aggregation values from the
port at the other end of the link and is therefore using its default
link aggregation LACP settings.
• No – The port has received link aggregation information from the
port at the other end of the link and is using the settings
negotiated with that port.
Indicates whether the negotiated link aggregation settings have
expired. The settings expire if the port does not receive an LACPDU
message from the port at the other end of the link before the message
timer expires. This field can have one of the following values:
• Exp – The link aggregation settings this port negotiated with the
port at the other end of the link have expired. The port is now
using its default link aggregation settings.
• No – The link aggregation values that this port negotiated with the
port at the other end of the link have not expired, so the port is
still using the negotiated settings.