HP 9304m Installation And Getting Started Manual page 303

Installation and Getting Started Guide
<num> d – day
•
• <num> h – hours
<num> m – minutes
•
<num> s – seconds
•
For example, "188d1h01m00s" means the device had been running for 188 days, 11 hours, one minute, and
zero seconds when the Syslog entry with this time stamp was generated.
Example of Syslog Messages on a Device Whose Onboard Clock Is Set
The example shows the format of messages on a device whose onboard system clock has been set. Each time
stamp shows the month, the day, and the time of the system clock when the message was generated. For
example, the system time when the most recent message (the one at the top) was generated was October 15 at
5:38 PM and 3 seconds.
HP9300(config)# show log
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Buffer logging: level ACDMEINW, 38 messages logged
level code: A=alert C=critical D=debugging M=emergency E=error
Static Log Buffer:
Dec 15 19:04:14:A:Fan 1, fan on right connector, failed
Dec 15 19:00:14:A:Fan 2, fan on left connector, failed
Dynamic Log Buffer (50 entries):
Oct 15 17:38:03:warning:list 101 denied tcp 209.157.22.191(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 2 packets
Oct 15 07:03:30:warning:list 101 denied tcp 209.157.22.26(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 2 packets
Oct 15 06:58:30:warning:list 101 denied tcp 209.157.22.198(0)(Ethernet 4/18
0010.5a1f.77ed) -> 198.99.4.69(http), 1 packets
Example of Syslog Messages on a Device Whose Onboard Clock Is Not Set
The example shows the format of messages on a device whose onboard system clock is not set. Each time stamp
shows the amount of time the device had been running when the message was generated. For example, the most
A - 6
I=informational N=notification W=warning