HP 9304m Installation And Getting Started Manual page 287
Procurve routing switches
Hide thumbs
Also See for 9304m:
- Management and configuration manual (690 pages) ,
- Installation and configuration manual (504 pages) ,
- User manual (236 pages)
Table of Contents
Advertisement
Installation and Getting Started Guide
USING THE WEB MANAGEMENT INTERFACE
To initiate an immediate boot from the primary boot source:
1.
Click on the plus sign next to Command in the tree view to expand the list of command options.
2.
Select the Reload option.
3.
Select Yes when the Web management interface asks you whether you really want to reload.
To initiate an immediate boot from a boot source other than the primary boot source:
1.
Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
2.
Click on the plus sign next to System in the tree view to expand the list of system configuration options.
3.
Select the Boot Sequence link to display the following panel.
4.
If the boot source with sequence 1 (the primary boot source) listed in the Boot Sequence List is the boot
source you want to use for the reload, use the procedure above. The device will use this boot source first.
Otherwise, go to the next step.
5.
If the boot source with sequence 1 is not the boot source you want to use, select the boot source that is listed
as the primary source, then click Delete.
6.
Click the boot source you want to use as the primary source. If you select TFTP server, enter the server's IP
address and the image file name you want the device to download from the server.
7.
Click the Apply button to save the change to the device's running-config file.
8.
Click the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change to
the startup-config file on the device's flash memory.
9.
Click on the plus sign next to Command in the tree view to expand the list of command options.
10. Select the Reload option.
11. Select Yes when the Web management interface asks you whether you really want to reload.
NOTE: While TFTP transfers are in process, a red bar labeled "processing" is displayed on the screen. When
the TFTP transfer is actively transferring image or configuration data, a green bar labeled 'loading' is displayed.
When a successful transfer is complete, the message "TFTP transfer complete" is displayed.
If a problem with the transfer occurs, one of the error codes listed in "Diagnostic Error Codes and Remedies for
TFTP Transfers" on page 10-14 is displayed.
10 - 6
Advertisement
Table of Contents
