HP 9304m Installation And Getting Started Manual page 323

Procurve routing switches
Table of Contents

Advertisement

Installation and Getting Started Guide
Message Level
Message
Notification
OSPF LSDB overflow, rid <router-id>,
limit <num>
Notification
OSPF LSDB approaching overflow,
rid <router-id>, limit <num>
Notification
OSPF intf rcvd bad pkt: Bad Checksum, rid
<ip-addr>, intf addr <ip-addr>, pkt size
<num>, checksum <num>, pkt src addr <ip-
addr>, pkt type <type>
Notification
OSPF intf rcvd bad pkt: Bad Packet type, rid
<ip-addr>, intf addr <ip-addr>, pkt size
<num>, checksum <num>, pkt src addr <ip-
addr>, pkt type <type>
Notification
OSPF intf rcvd bad pkt: Unable to find
associated neighbor, rid <ip-addr>, intf addr
<ip-addr>, pkt size <num>, checksum
<num>, pkt src addr <ip-addr>, pkt type
<type>
A - 26
Table A.2: HP Syslog Messages (Continued)
Explanation
A Link State Database Overflow (LSDB)
condition has occurred.
The <router-id> is the router ID of the HP
device.
The <num> is the number of LSAs.
The software is close to an LSDB condition.
The <router-id> is the router ID of the HP
device.
The <num> is the number of LSAs.
The device received an OSPF packet that
had an invalid checksum.
The rid <ip-addr> is HP device's router ID.
The intf addr <ip-addr> is the IP address of
the HP interface that received the packet.
The pkt size <num> is the number of bytes in
the packet.
The checksum <num> is the checksum value
for the packet.
The pkt src addr <ip-addr> is the IP address
of the neighbor that sent the packet.
The pkt type <type> is the OSPF packet type
and can be one of the following:
hello
database description
link state request
link state update
link state acknowledgement
unknown (indicates an invalid packet
type)
The device received an OSPF packet with an
invalid type.
The parameters are the same as for the Bad
Checksum message. The pkt type <type>
value is "unknown", indicating that the packet
type is invalid.
The neighbor IP address in the packet is not
on the HP device's list of OSPF neighbors.
The parameters are the same as for the Bad
Checksum message.

Advertisement

Table of Contents
loading

This manual is also suitable for:

9315m

Table of Contents