HP 9304m Installation And Getting Started Manual page 53

Installation and Getting Started Guide
Searching and Filtering Output at the --More-- Prompt
The --More-- prompt is displayed when output extends beyond a single page. From this prompt, you can press the
Space bar to display the next page, the Return or Enter key to display the next line, or Ctrl-C or Q to cancel the
display. In addition, you can search and filter output from this prompt. For example:
HP9300# ?
append
appletalk-ping
attrib
boot
cd
chdir
clear
clock
configure
copy
debug
delete
dir
disable
enable
erase
exit
fastboot
format
gignpa
hd
kill
--More--, next page: Space, next line: Return key, quit: Control-c
At the --More-- prompt, you can press the forward slash key ( / ) and then enter a search string. The HP device
displays output starting from the first line that contains the search string, similar to the begin option for show
commands. For example:
--More--, next page: Space, next line: Return key, quit: Control-c
/telnet
The results of the search are displayed:
searching...
telnet
temperature
terminal
traceroute
undebug
undelete
whois
write
To display lines containing only a specified search string (similar to the include option for show commands) press
the plus sign key ( + ) at the --More-- prompt and then enter the search string.
--More--, next page: Space, next line: Return key, quit: Control-c
+telnet
The filtered results are displayed:
filtering...
telnet
To display lines that do not contain a specified search string (similar to the exclude option for show commands)
press the minus sign key ( - ) at the --More-- prompt and then enter the search string.
2 - 26
Append one file to another
Ping AppleTalk node
Change flash card file attribute
Boot system from bootp/tftp server/flash image
Change flash card working slot or current directory
Change flash card working slot or current directory
Clear table/statistics/keys
Set clock
Enter configuration mode
Copy between flash, flash card, tftp, config/code
Enable debugging functions (see also 'undebug')
Delete flash card files
List flash card files
Disable a module before removing it
Enable a disabled module
Erase image/configuration from flash
Exit Privileged mode
Select fast-reload option
Format flash card
Gigabit processor commands
Display hex dump of flash card file
Kill active CLI session
Telnet by name or IP address
temperature sensor commands
display syslog
TraceRoute to IP node
Disable debugging functions (see also 'debug')
Undelete flash card files
WHOIS lookup
Write running configuration to flash or terminal
Telnet by name or IP address