Connecting Power To The Device - HP 9304m Installation And Getting Started Manual

Installation and Getting Started Guide
1. Remove the rack mount kit from the shipping carton. There will be two L-shaped mounting brackets and
mounting screws.
2. Attach the mounting brackets to the sides of the Routing Switch as illustrated in Figure 2.8.
3. Attach the system in the rack as illustrated in Figure 2.8.
4. Proceed to "Connecting Power to the Device" on page 2-18.
Figure 2.8 Installing an HP 9304M Routing Switch in a rack mount

Connecting Power to the Device

With physical installation of the Routing Switch complete, it is now time to power up the system and connect the
network devices.
2 - 18
9304M Exceeds 40 lbs. (18.1 kg)
9308M Exceeds 55 lbs. (24.9 kg)
9315M Exceeds 80 lbs. (35 kg) without modules and power
supplies installed. To avoid personal injury, reduce weight
of chassis by removing all modules and power supplies
from chassis prior to lifting or moving.
When handling, two or more people are required.